Floor Machines
Hawk Orbital Scrubbers
TigerHawk
Square Orbital Floor Machine
Chemical Free Floor Finish Stripping
H11F-Tiger1410 – 14X10
H11F-Tiger2014 – 20X14
H11F-Tiger2814 – 28X14
The TigerHawk1410, TigerHawk2014 and Tigerhawk2814 utilizes a dry chemical free process to prepare resilient tile flooring to be re-finished. The Dry Strip Process uses the specially engineered surface preparation rectangular pads which easily removes surface finish in preparation for recoating. It does not remove the finish below the surface thereby saving the first two coats of recoating finish. Saves time and finish costs.
The TigerHawk advantage is in its rectangular design. It allows the operator to get in the corners efficiently without getting on their hands and knees. You can not do this with a conventional unit. Furthermore, learning to operate the TigerHawk can be done in minutes. Meets GS42 Guidelines. The TigerHawks revolutionary rectangular, floating head design allows the operator to easily maneuver the unit with less fatigue than the normal oscillating units available on todays market. It also enables access to corners while standing, unlike conventional floor machines.
Available 14×10, 20×14 and 28×14 sizes. The 20×14 and 28×14 come with cart, and have vac & dust skirt and sprayer options.
The Hawk TigerHawk Has The Following Features
- Start Run Capacitor Totally Enclosed Fan Cooled Motor Keeps Out Dirt And Dust For Longer Motor Life.
- Extra Heavy Duty Spring Steel Cord Strain Relief With a 2 Piece 12-3 Power Cord.
- Low Current Draw
- Thumb Operated Safety Switch
- Negative Pressure On Off Switch
- Dual Steel Operating Triggers For Left or Right Hand Operation
- One Piece Industrial Powder Coated Heavy Duty Steel Handle For Optimum Durability.
- Welded frame For Rugged, Reliable, Performance. 5 Inch Non Marking Ball Bearing Wheels
- Multiple Position Handle Adjustment For Operator Comfort And Safety.
- Comfort Style Vinyl Handle Grips For Ease Of Use.
- Full Wrap Around Dust Skirt.
- Generous Manufacturers Warranty: 1 Year On Motor And Labor And 3 Years On Non Wear Parts.
Hawk Floor Scrubbers
F0009-CP 17″
Standard Floor Machine
- Pad Size: 17 Inches
- Power Source: 115V / 60 Hz
- Motor: 66 Frame, 1.5 Hp, Dual Capacitor
- Amp Draw: 5.9
- Gear Box: 3-Idler 10:1
- Brush Speed: 175 RPM
- Cord: 50 Foot
- Weight: 94 lbs
- Manufacturers Three years motor warranty, One year non-wear parts & labor
Accessories:
F401626-16 – pad driver
M22NP9200 – clutch plate
View Specs
F0012-180CP 20″
Brute Floor Machine
Absolutely unsurpassed for power, performance, and productivity. The Brute is the strongest 115V floor machine on the market. Whatever the job–the Brute will handle it! Whenever you need a floor machine you can rely on to handle the toughest jobs, turn to the Hawk for the best. Especially suited for marble, concrete, floor scraping, sanding, and any other extreme situation.
- Pad Size: 20 Inches
- Pad Holder & 1 weight included
- Weight 125 lbs
- Totally Enclosed Fan Cooled Motor Keeps Out Dirt For Longer Motor Life.
- Twin Capacitor 180 Frame 1.5 Horse Power Motor.
- Virtually Indestructable Gearbox. Low Current Draw.
- Cord: 50 Foot
- UL/CUL Approved.
- Manufacturers Three years motor warranty, One year non-wear parts & labor
Accessories:
F401626-19 – pad driver
M22NP9200 – clutch plate
View Specs
F0012XHD 20″ Xtra
H/D Floor Machine
When the job gets tough, the tough get going with Hawks Xtra Heavy Duty Floor Machine. Maximum power is obtained by utilization of a 1.5 HP, twin capacitor motor driving an XHD 11:1 gearbox. With a wide range of accessories and optional weights, all sold separately, there is no job these machines can not handle.
- Pad Size: 20 Inches
- Power Source: 115V/60Hz
- Motor: 66 Frame, 1.5 Hp, Dual Capacitor
- Amp Draw: 6.8
- Gear Box: 3-Idler 11:1
- Brush Speed: 165 RPM
- Cord: 50 Foot
- Weight: 98 lbs
- Manufacturers Three years motor warranty, One year non-wear parts & labor
Accessories:
F401626-19 – pad driver
M22NP9200 – clutch plate
View Specs
F0013CP 13″
Floor Machine
Hawk Model HP1513 Commercial Floor Polisher Easily maintains a variety of flooring surfaces. Built for scrubbing, stripping, polishing, carpet cleaning and more. Built-in safety shut-off, twin capacitors, steel planetary gear drives and heavy-duty, wrap around bumper.
- 175 rpm brush speed
- 1.5 HP motor, 2 capacitors
- 50-ft., three wire cord
- Includes Pad Holder
- Weight 88 lbs
- UL Approved for safe permormance
- All steel bell housing
- Ultra-quiet twin planetary gear transmissions
- Adjustable handles
- Non-marking transport wheels
- Manufacturers Three years motor warranty, One year non-wear parts & labor
Accessories:
F401626-12 – pad driver
M22NP9200 – clutch plate
View Specs
Call your representative to schedule a demo.